STDR 2 PNEUMATIC SINGLE-ROLLER DEVICE FOR PEENING ROLLS ON LATHES
SINGLE-ROLLER PNEUMATIC DEVICE FOR HARDENING RUNNING-IN OF SHAFTS ON A LATHE.
It is used on universal lathes and is installed on the slide perpendicularly and strictly along the axis of the workpiece.
Air pressure in the system is 4-6 k/cm2.
Adjustable run-in force range from 30 to 1000 kg.
The device can roll a hardened layer on the surface of the workpiece with a depth of up to 0.15 mm.
The swivel base allows to adjust the working angle of the roller relative to the workpiece and process areas in joints, headrests, radiuses at the transition of diameters. The rollers are made of stamped steel.
Pressure is provided by the pneumatic system of the machine or by connection to a compressor. Feeding of coolant into the deformation zone is mandatory.
SURFACE PLASTIC DEFORMATION TREATMENT,
Surface riveting, residual deformation by surface riveting,
Strengthening rolling, Rolling, Smoothing pulling, Vibration smoothing, Vibratory rolling.
Smoothing rolling, Forming rolling, Strengthening rolling, Calibrating rolling,
Surface stressed riveting, Roughing, Surface rolling, Vibratory machining
Surface Reduction, Surface Rolling, Surface Reaming, Surface Reboring.
Tools for hardening knurling, Tools for knurling polishing, Knurling polishing and hardening knurling,
Plastically deform the surface layer of the workpiece, the low compressive stress zone, by knurling polishing,
plastic deformation of the surface layer, increase fatigue resistance of parts, hardening treatment by rolling, rolling, smoothing,
hardening of the surface layer of the part, improving surface finish
Rolling, Walzen, Festwalzen, Glattwalzen, Feinwalen, Rolling finishing, Formwalzen, Form rolling, Size rolling,
Plastische Oberflachenverformung,Surface plastic deformation,Surface working
Innenkegelbearbeitung, glattwalzen, rollieren, rollwalzen, glatten,Rollierwerkzeuge
Optimierte Oberflachen durch Glatten und Verfestigen,
Glattwalzen, Glatten, Rollwalzen, Diamantglatten, Festwalzen, burnishing, roller burnishing, deep-rolling
technology based on target oriented local strengthening of the surface layer of the axle parts.
smooth surface by cold moulding the surface layer